JetBook color Update July

Hi , Jerry.
I bought two Color one week ago. One is working perfect. But another has hang up. I tried to restart, Nothing heppend.
When I try to reboot with mini SD, I always see the error 114:85800. I have tried a lot of time. The same result.
Can you help me.

Viator wrote:Hi , Jerry.
I bought two Color one week ago. One is working perfect. But another has hang up. I tried to restart, Nothing heppend.
When I try to reboot with mini SD, I always see the error 114:85800. I have tried a lot of time. The same result.
Can you help me.

Hey,

Thanks for the message and sorry to hear about the difficulty. Please try to reset the unit with the micro SD card out of the device to make sure it is not causing any issues.

If still no luck, try the update. First do the OS update and then the Firmware. http://www.jetbook.net/update/jetbookcolor

If it still gets caught up let me know exactly where and when.

Hope this helps!

Hi Jerry,
I found the reason why teh update was not going.
As stating onf the update page, I had connected the jetbook color via USB in order to avoid disruption during the update, BUT I had connected it to my PC using a standard USB cable.
However, when the Jetbook is on and you connected it to your PC through USB, it unmount the SD card, so I have the feeling that it unmount the SD card directly at startup if you connect it to PC through USB cable.
If I don't connect it at all to my PC, the update is starting. For now it's about 1/4....

Hi Jerry,
Update finished successfully.

So, as a conclusion, do not put your Jetbook into your PC's USB port for running an update. You have to use an specific USB charger only or an USB cable without data wires but only with power wires.

mdeg wrote:Hi Jerry,
Update finished successfully.

So, as a conclusion, do not put your Jetbook into your PC's USB port for running an update. You have to use an specific USB charger only or an USB cable without data wires but only with power wires.

Very nice, glad you have it working!!

Jerry, I tryed to reinstall OC. I Tryed to Install Spanish version. No any results. I think the memo is broken. How I can start the process to returne Jetbook to factory?

Viator wrote:Jerry, I tryed to reinstall OC. I Tryed to Install Spanish version. No any results. I think the memo is broken. How I can start the process to returne Jetbook to factory?

Hi,

Thanks for the message. If the item is still unable to update please contact support. You can call them at 718-728-3605 or email [email protected]

If via email, make sure you check your spam filter for a response.

Hope this helps!

Have done the latest update and everything works fine - but is there a way to turn off the status bar banner when reading books and PDF's? I bought a large screen reader for the screen real estate and don't want to lose even that much when viewing my PDFs. This is new as of this latest update, before the PDF was full screen.

m0rdant wrote:Have done the latest update and everything works fine - but is there a way to turn off the status bar banner when reading books and PDF's? I bought a large screen reader for the screen real estate and don't want to lose even that much when viewing my PDFs. This is new as of this latest update, before the PDF was full screen.

Hi,

Press the menu button in the book. Navigate towards the bottom of the menu. Select 'full screen'.

Hope this helps!

"Full Screen" still shows the status bar.

Sorry, you are right - full screen fixes the problem - I was trying zoom 100%. Thanks!

m0rdant wrote:Sorry, you are right - full screen fixes the problem - I was trying zoom 100%. Thanks!

No problem

Thanks

Can the "screen saver" picture be changed?

This message was edited 2 times. Last update was at 08/24/2012 11:48:23

[Jerry - Edit] - This message has been removed. Please do not post the same exact message in multiple threads. The point of the forums is to have discussions and to provide useful feedback.

m0rdant wrote:Thanks Can the "screen saver" picture be changed?

Yes, you can just change the poweroff.jpg image in the root folder. Hope this helps!