[Logo]
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics   [Members]  Member Listing   [Groups] Back to home page 
Forum rules     [Register] Register /  [Login] Login 
        Now, by registering on our forum you get a chance to receive giveaway offers, valuable discounts and other great deals! There is no obligation to buy anything - just register and contribute to the forum to take advantage of this great opportunity.
Update Flashing Question Regarding Sd card  XML
Forum Index » jetBooks
Author Message
[Post New]07/08/2010 07:28:38
    Subject: Update Flashing Question Regarding Sd card
[Up]
cybersmoke53



Joined: 12/31/2009 21:28:40
Messages: 13
Offline
I have just received my replacement Jetbook Lite device after .15G upgrade attempts killed my original Jetbook Lite. (The device would no longer talk to SD cards except to update - go figure! but otherwise was a brick with no Linux or working file system)

Since I had issues last time I want to know.. should we turn off the unit with reset and then install the SD card we are using to update or does it need to be installed while the device is powered on as usual. The last time I removed my normal SD card - unit was on and it said was updating file list don't install SD.. and after this I think I may have gone ahead and put the update SD in while the device was on.
2cd question.. when update completes normally and you do the reset, should you remove the SD card with the update firmware while the device is off and then restart the unit by holding powerbutton 3 seconds until screen lites to finish the installation process or leave the update SD card in the device and then remove while
[Post New]07/08/2010 11:01:51
    Subject: Update Flashing Question Regarding Sd card
[Up]
Jerry



Joined: 06/28/2010 05:09:51
Messages: 908
Offline
cybersmoke53 wrote:I have just received my replacement Jetbook Lite device after .15G upgrade attempts killed my original Jetbook Lite. (The device would no longer talk to SD cards except to update - go figure! but otherwise was a brick with no Linux or working file system)

Since I had issues last time I want to know.. should we turn off the unit with reset and then install the SD card we are using to update or does it need to be installed while the device is powered on as usual. The last time I removed my normal SD card - unit was on and it said was updating file list don't install SD.. and after this I think I may have gone ahead and put the update SD in while the device was on.
2cd question.. when update completes normally and you do the reset, should you remove the SD card with the update firmware while the device is off and then restart the unit by holding powerbutton 3 seconds until screen lites to finish the installation process or leave the update SD card in the device an
Jerry C,
Ectaco Inc
www.ectaco.com


Please make sure you review each threads unique RULES before posting.
[Post New]07/08/2010 12:18:20
    Subject:
[Up]
cybersmoke53



Joined: 12/31/2009 21:28:40
Messages: 13
Offline
Thanks Jerry!

Yes it makes a lot of sense. The instructions to update do not tell you to specifically insert SD card while the device is ON or When to remove the SD card you used to update the firmware.

I have found out the hard way only pull out the SD card while JetBook Lite is ON when I had to reformat the card and reset back default my Jetbook lite to be able to read books again.


-Karen
 
Forum Index » jetBooks
Go to: